The worst thing that you can find in your newly built home is mold, but it is something that is built into homes these days by careless contractors bent on getting the job done with as little effort as possible on their part. As the employer of the contractor, it is your responsibility and in your best interests to be at the job site on a regular basis to ensure that the building materials that your contractor purchased to build your home with are both up to your standards and that they are handled correctly.
Your contractor should have purchased only the materials that you outlined in your contract with him or her to purchase. They should have purchased nothing more and nothing less. None of these materials, especially drywall, should be stored directly upon the ground where it comes into contact with the soil. They should be stored on tarps or raised up off the ground in some way. This will help ensure that mold does not start to grow on them before they are used in the construction of the house.
The building site should also be covered with tarps before it rains until the roof and walls are put up to protect the interior of the structure.
Before you hired your contractor, you should have obtained references from him or her to determine the quality of their craftsmanship. This is something that you should do when hiring anyone to do almost anything for you concerning an investment such as this. You should ask the references whether they have had any problems with mold or water damage since their home was built and if it was due to bad construction or not. As long as your contractor is known for good building practices, you should have no problem with the way that he treats the building materials for your house.
It is unfortunate that you cannot be at the site of your home’s new construction all the time, but the more you are able to check on the progress of your home’s construction, the better. You should have a mold inspector come and inspect the property at least twice, once during the middle of the construction and again once it is completed to determine that there is no mold growing in the home.
Showing posts with label mold. Show all posts
Showing posts with label mold. Show all posts
Wednesday, January 23, 2008
Bathroom Water Damage and Mold Help
Nobody wants to find mold growing in the bathroom, but you will if you do not take the proper steps to make sure that it is taken care of on a regular basis. There are a number of things that you can do to stop mold from growing in your bathroom and since you will spend a large amount of time in this room over the years, it is suggested that you take these steps no matter what it might cost your wallet. The last thing you want is to need a mold remediation done in the bathroom that could cost you thousands of dollars simply because you did not take the time and effort to care for it.
One of the most important parts of your bathroom is not the tub, the toilet, or the sink, but the floor. This holds up everything else in the room and if this goes, the entire thing will fall to the ground underneath the house. This happens more often than you think and it is usually due to floors not being properly waterproofed. You can do this by making sure that there are no cracked tiles or cracked portions of linoleum or whatever flooring you have decided to have put down in the bathroom. If the flooring is old and you have not had it replaced since you have lived in the home and it is damaged, you will want to seriously consider having the floor checked out to see if it is water damaged. Mold can also start growing underneath it, so if the bathroom smells musty at all, you may want to have the house checked for this, too.
Another thing that you want to consider adding to the room is an exhaust vent. Exhaust vents are required by many local building codes and you may not really feel like you need it if you have a window, but installing one is a good investment since it is not always a good idea to leave the bathroom window open. The reason for these vents is so steam is not absorbed by the ceiling and upper walls and cause them to become molded over time. Ceilings that absorb water like this will also start to sag and possibly collapse later.
You should also keep an eye on the plumbing underneath the sink and near the toilet. You should not neglect the slow drips that can happen with these pipes and you should get them fixed as soon as possible, no matter how water tight your floor might be.
One of the most important parts of your bathroom is not the tub, the toilet, or the sink, but the floor. This holds up everything else in the room and if this goes, the entire thing will fall to the ground underneath the house. This happens more often than you think and it is usually due to floors not being properly waterproofed. You can do this by making sure that there are no cracked tiles or cracked portions of linoleum or whatever flooring you have decided to have put down in the bathroom. If the flooring is old and you have not had it replaced since you have lived in the home and it is damaged, you will want to seriously consider having the floor checked out to see if it is water damaged. Mold can also start growing underneath it, so if the bathroom smells musty at all, you may want to have the house checked for this, too.
Another thing that you want to consider adding to the room is an exhaust vent. Exhaust vents are required by many local building codes and you may not really feel like you need it if you have a window, but installing one is a good investment since it is not always a good idea to leave the bathroom window open. The reason for these vents is so steam is not absorbed by the ceiling and upper walls and cause them to become molded over time. Ceilings that absorb water like this will also start to sag and possibly collapse later.
You should also keep an eye on the plumbing underneath the sink and near the toilet. You should not neglect the slow drips that can happen with these pipes and you should get them fixed as soon as possible, no matter how water tight your floor might be.
Subscribe to:
Posts (Atom)
